Xinxiang Henan, China
1. Dynamic power provide by Japan YAMAHA generator
2. Hot melting kettle
Hot melt kettle is mainly used for pouring hot melt materials, heating, with capacity of 45L. Feeding port on top of the melting kettle, material loading height is 900mm.
3. Heating system
A. Using liquefied petroleum gas as heating fuel, indirect heating materials through heat conducting oil, improving the melting rate, heat evenly and the material is not easy to aging.
B. Heating temperature 50 ~ 290 degrees, heating time of 40-60 minutes.
4. Control system
Adopt centralized control panel displays the set and actual temperatures of conducting oil, sealant material and heating hose. All temperatures can be adjusted accurately, easy to operate.
5. Stirring system
Vertical paddle stirring structure set in the melting kettle, manually stirrer rotation fast, so that the material heated to a suitable pouring temperature.
6. Material conveying system
A. Electric heating hose can ensure that the temperature inside of the melting kettle and material pouring port basically the same, so that the material pouring system is not easy to block.
B. Pressure injection pouring, asphalt pump produces pumping pressure to seal the material into the cracks.
C. Applies to ordinary asphalt and crack sealant material; Sealant material pumping pouring through the asphalt pump, the flow speed can be adjusted.
7. Walking system
EAGER-A45 is a hand-push type sealing machine, installed with steering flexible caster, manual control material pouring direction, suitable for filling regular and irregular cracks; Special wear-resistant rubber wheel.
|Basic parameter||Walking Way||Hand push; straight or ballistic movement when working; irregular cracks sealing through the universal back wheels; regular cracks sealing after fixed the back wheels.|
|Fuel||Liquefied petroleum gas; clean and environmental.|
|Way of Crack Sealing||Flushbonading; orientation for straight crack|
|Area of Application||common asphalt and crack sealant|
|Melting kettle||Work bin capacity||45L|
|Structure of the kettle||Round high multi-layer insulation structure; the outer sphere is made from 30 mm aluminum silicate material with steel shell; keeping warm strongly|
|Temperature keeping ability||Not exceeding 2 degree of the temperature decreasing per hour|
|Way of charging||Charging from the top, keep from dangers for the operators|
|Material melting system||Way of heating||Directly heating material through heating the transfer oil and heating the bottom and walls of the kettle; improved the melting speed; heating evenly; preventing from material aging|
|Way of stir||Manual stir; heating material indirectly by the heating transfer oil; raising the heating temperature evenly and fast|
|Heating time for the full kettle||40-60min|
|Temperature range||50-290 degree|
|Control mode||Thermostatical control during the whole course; setting up the heating temperature according to the safe heating temperature of common asphalt and the crack sealant|
|Temperature display||Temperature controller digital LCD display|
|Controlling way for the electrical equipment||Electric circuit centralized control|