Flanged EPDM flexible rubber joint/rubber expansion joint

This product is reinforced by multiple layers of nylon or polyester cord fabric in the inner layer and designed with rubber sphere and loose metallic flange in the outer layer. High pressure resistance, good elasticity, significant displacement, good effect of vibration absorption and noise reduction, and easy for installation;

Featured Products

This product is reinforced by multiple layers of nylon or polyester cord fabric in the inner layer and designed with rubber sphere and loose metallic flange in the outer layer. High pressure resistance, good elasticity, significant displacement, good effect of vibration absorption and noise reduction, and easy for installation; widely used in the piping systems of water supply and drainage, HVAC, fire control, compressor, papermaking, pharmaceutical, ship, pump, fan and other fields. 
Joint materials:

S.NPartMaterial
1Main bodyPolarized rubber
2LiningNylon or polyester cord fabric
3CasingHard wire or steel ring
4FlangeLow-carbon or stainless steel

 Technical requirements:

Model itemCKST-F(I)CKST-F(2)CKST-F(3)
Working pressure MPa(kgf/cm²)2.0(20)1.2(12)0.8(8)
Bursting pressure MPa(kgf/cm²)6.0(60)3.5(35)2.4(24)
Vacuum degree kPa(mmHg)100(750)86.7(650)53.3(400)
Suitable temperature (ºC)-20~+115
Applicable mediaAir, compressed air, water, sea water, hot water, weak acid, etc.
Both ends of the joint can be arbitrarily deflected, easy for free adjustment of axial or lateral displacement.
Flanged EPDM Flexible Rubber Joint/Rubber Expansion Joint

Flanged EPDM Flexible Rubber Joint/Rubber Expansion Joint
Flanged EPDM Flexible Rubber Joint/Rubber Expansion Joint
Flanged EPDM Flexible Rubber Joint/Rubber Expansion Joint
Flanged EPDM Flexible Rubber Joint/Rubber Expansion Joint

FAQ

1. Can I get free samples?
A: Yes, we can provide you the free samples, but you need to bear their own delivery costs.

2. Can I request to change the form of packaging and transportation?
A: Yes, We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.

3. Can I request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.

4. Can I have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.

5. Can you produce the products according to my own drawings?
A: Yes, we can produce the products according to your drawings that will be most satisfy you.

6. Which price terms could accepted?
A: FOB,CIF all acceptable.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours